- Flir client 12 update how to#
- Flir client 12 update apk#
- Flir client 12 update install#
- Flir client 12 update update#
Now TIFF data can be converted to temperature in post-processesing.
If you previously selected ‘No’ in this dialogue you will need to go to Settings -> About -> Scan for Devices to reconnect. The camera should reconnect and present you with the Main screen.
Flir client 12 update update#
The app will read the camera’s settings, then display the Firmware update message. Start Update Process - Open the FLIR UAS app and connect to the camera.If the Bluetooth radio does not enable, press the button to it on. Power on Duo - Power on the Duo and wait for it to complete the boot cycle (you’ll hear the three beeps and see the Bluetooth light go steady blue and the Record light go steady green).Load this file onto the camera micro SD card either by connecting your Duo to the computer with the included Bench cable, or through another suitable micro SD card reader. Download Firmware Update - Download the firmware upgrade archive to your computer and unzip the Duo_I_V#.#.#.ITM file.The firmware upgrade will reset the camera settings to defaults since we typically are adding features and the previous settings may not be optimal for your application. Backup Duo Settings - Connect to the Duo with the Bluetooth application and make note of all your settings.
Flir client 12 update apk#
Also be sure to keep the OS up to date on your device as Bluetooth is an evolving protocol and receiving continuous improvements.Īndroid APK Direct Download Updating FLIR Duo Firmwareĭownload the latest firmware HERE. Please download the latest handset application from the appropriate web store for your platform.
Flir client 12 update how to#
The DVR / NVR will automatically restart when the firmware upgrade is complete.Ĭlick here for information on how to manually update firmware using your LHA / LNK Series DVR / NVR system.Ĭlick here for information on how to manually update firmware using your LHB Series DVR.Download FLIR Duo Firmware and Software Updating the FLIR UAS App bin file saved on your PC / Mac, and then click Open.Īllow 5-10 minutes for the system to upgrade. Under Advanced, click Maintenance > Firmware Update tab. Launch the FLIR Client 12 software on your PC / Mac. To manually update the DVR / NVR firmware:
Click here for more information on locating software downloads.
Flir client 12 update install#
Download and install the FLIR Client 12 software on your PC / Mac.Do not power off the DVR / NVR during a firmware upgrade. Technical support will provide you with a. IMPORTANT: It is recommended to use automatic upgrade unless directed by technical support to perform a manual upgrade. Manually by connecting a USB flash drive (not included) to your PC / Mac and using the FLIR Client 12 software.
Click here for more information about manually upgrading firmware through your DVR / NVR. Manually by connecting a USB flash drive (not included) to your DVR / NVR.Click here for information on how to automatically upgrade firmware. Automatically over a network, connected by an Ethernet cable (included).Your LHA / LNK Series DVR / NVR can receive firmware updates: